Use The Best Wall Art Resin

Just Resin
Aug 1
2 min read

What Kind of Resin Is Best for Wall Art Pours?

When it comes to creating resin wall art, choosing the right type of resin is crucial.

There are various types of resin available, each with its own unique properties and uses. The most popular resin for wall art is epoxy resin, as it is known for its durability and clarity. Epoxy resin is also self-levelling, making it easy to work with and perfect for creating smooth finishes on flat surfaces. It can also be pigmented or mixed with other materials such as glitter or alcohol inks to create stunning effects.

Just Resin suggests two art resin kit options for wall art. With these kits from Just Resin, creating unique and eye-catching resin wall art has never been easier or more accessible.

DiamondCote is a 1:1 Ratio Epoxy Resin – For a total of 400mls required, you will need 200mls of Part A & 200mls of Part B.

Mix for approx. 3mins, making sure the components are combined well, and ensuring consistency is even throughout, paying attention to the sides and bottom of the mixing vessel.

You have an approximate working time of 70 minutes once Part A & B are combined, this time does depend on a variety of factors..

JR Art Resin is a 2:1 Ratio Epoxy Resin – For a total of 300mls required, you will need 200mls Part A & 100mls Part B.

Mix for approx. 3mins, making sure the components are combined well, and ensuring consistency is even throughout, paying attention to the sides and bottom of the mixing vessel.

You have an approximate working time of 40 minutes once Part A & B are combined, this time does depend on a variety of factors.

ArtCote is a 1:1 Ratio Epoxy Resin – For a total of 200mls required, simply mix 100mls of Part A with 100mls of Part B. Stir thoroughly for approximately 3 minutes, ensuring both components are well blended, with special attention to the sides and bottom of your mixing vessel for a uniform mix. You’ll have an approximate working time of 60 minutes once combined, though this can vary depending on temperature and working conditions (see page two for more information).

ArtCote is a high viscosity, premium top coat resin formulated specifically for artists. It can be poured, brushed, or rolled over a range of substrates including art boards, MDF, acrylic sheets, concrete, metal, and wood. It offers excellent air release, a high-gloss finish, and is low in VOCs. ArtCote can also be tinted with Just Resin Pigment Pastes, Powders, Glitters, and Inks for unique visual effects.

Cure time is approximately 24 hours, with full cure at 7 days. Heat resistant up to 50°C (higher levels are still undergoing testing).